Author Archives: Fred Oster

Scratches in hardwood floor with a wax finish require waxing the location completely. For instance, heel marks can be fixed by massaging a little amount of wax in with great steel wool and hand buffing to gorgeous shine. If the scratch is in a hardwood floor with a surface area finish the repair work needs a touch-up kit produced urethane finishes that can be purchased at your neighborhood wood flooring sellers.

While some laminate floor types could look like strong hardwood, they are really just a translucent wear layer atop an image (decorative layer) of the wood that it’s made to look like. Laminate flooring can not be refinished; commonly times the only method to fix damage is to replace them. Save yourself money and time for laminate repairs by wiping up pet mishaps and water bowl spills right away after they occur. Many discolorations can be eliminated with a cleaning solution that’s recommended by the manufacturer.

If you have a natural wood floor that has actually become damaged over the years, you do not need to keep it covered with rugs or carpets, all you have to do is participate in some basic hardwood floor repair. It truly just takes a few minutes to replace the broken planks and have your floor looking brand name brand-new again. In order to undergo this task you will certainly require the following tools: a circular saw, hammer, chisel, construction adhesive, mallet, flooring nails, scrap wood, and wood filler.

Laminate or Hardwood which is easier?

Remember that both hardwood and laminate flooring do not take well to pet dog mishaps. The acidity of urine can trigger damages that could be impossible to fix. A benefit to purchasing strong hardwood flooring is that it can typically be refinished a few times during its lifecycle. Refinishing is the process of sanding and staining your floors so they look near, or as great, as they did when you first acquired them. Refinishing can assist get rid of unpleasant scratches from household pet nails and surface dings.

The charm below is that the flooring squeak is easily repaired but there is no large screw head marring your finish. The continuing to be small hole is then filled with wood filler that matches your flooring and is hardly visible! This system is certainly the answer to your squeaky hardwood floor dilemmas.

The next thing you have to do when fixing hardwood floors is to use your flooring nails to secure the brand-new plank to floor. You could also want to utilize your nail set to keep the nails concealed; it also will not harm to make use of wood filler to keep the screws out of sight. Now, the final step is to use finish to the new plank, trying to match the tone of the other original planks as best as possible. It is frequently difficult to do this, so you could have to choose whether you ought to just refinish the remainder of the floor or have a plank or 2 of a somewhat various shade.

All wood floors develop wear marks over time. This is part of the charm of wood. Some people prefer softer woods because they develop a patina more quickly. For example, wide plank pine is very popular among traditional and historic homeowners because it soon develops an “aged” feel. Others do not find wear charming, and they tend to choose harder woods such as Oak, Hickory, Maple, and Ash. Depending on your tolerance for wear, you may want to factor species hardness into your flooring decision. One way of comparing the hardness of various woods is the Janka hardness scale, which measures the force required to push a tiny steel ball into a piece of wood. The higher the Janka number, the harder the wood. Janka numbers for wood species are available online. Though your floor is unlikely to ever experience the kind of pressure exerted for the Janka scale, hardness numbers can give you an idea of the general toughness of the various wood species.

The term wide plank flooring refers to solid, usually unfinished, wood flooring greater than 3 inches in width. Most wide plank flooring is between 3″ and 20″ in width and is sold in random widths (a random amount of three or more different widths). In the old days, people used the entire log or resource that was available to them, so floors in old homes have planks of several different widths, known as random widths. Single width floors, a more recent invention, are also available, although there is often a surcharge for single width orders or repeating pattern orders as this requires the manufacturer to do more sorting of the product.

Where you plan to place the floor in your home may make all the difference in your wood selection. Depending on your tolerance, a harder wood may be a better choice for a high-traffic area, while a lower-traffic area such as a bedroom may be the best place for a softer wood. Placing area rugs over your wood floor in high-traffic areas will also help reduce wear. Of course, wide plank flooring can always be refinished to remove scuff marks, if desired. The beauty of solid wood floors is that they can be sanded and refinished many times and still have a lifetime of wear left in them.

After weighing the many choices available to you and comparing manufacturers for the best product and price, rest assured that your efforts will pay off in more ways than one. According to the National Wood Flooring Association (NWFA), 90 percent of realtors polled in a national survey said that homes with real wood floors sell faster and at higher prices than those that do not have wood floors. So think of wide plank flooring as an investment in your home that you get to enjoy every day.

Buildings and building materials respond to atmospheric changes. Therefore, while securing the flooring to the subfloor may help reduce and mitigate the problem, some squeaking will likely reoccur when the weather changes, perhaps in a different part of the room.

If you have a natural wood floor that has become damaged over the years, you do not have to keep it covered up with rugs or carpets, all you have to do is engage in some simple hardwood floor repair. It really only takes a few moments to replace the damaged planks and have your floor looking brand new again. In order to undergo this project you will need the following tools: a circular saw, hammer, chisel, construction adhesive, mallet, flooring nails, scrap wood, and wood filler.

If you have severe hard wood floor water damage, repair can be very costly. If there is any warping, you must remove the hardwood and replace it. If there are just water stains, you can sand the area of the staining, re-stain the wood if necessary, and reseal the wood.

The first thing you need to do when repairing hardwood floors is to remove the planks in your floor that have been damaged. In order to remove a plank you must first carve a hole in the middle with your circular saw. Next, simply hammer out this center part with a chisel. Now it should be easy for you to pry out the remainder of the plank. Repeat this process for each of the remaining damaged planks. Also make sure that you remove any nails that remain in the floor. If they are too difficult to remove, you can always just drive them completely into the subfloor.

When using wood flooring over under-floor heating, a constant drying out of the wood can occur during the heating season without the correct climate control. With a lacquer finished floor, the first signs that the wood is being damaged is linear cracks opening up down the grain. This is due to all the moisture being dried out of the wood. Occasionally this can make the floor beyond repair.

There are tons of wood floor repair kits out on the market. You can buy a generic one – I shared a pretty good one in the Amazon products section. Or, you can call your wood floor manufacturer and ask for recommendations. It could be that they’ve created a kit specifically designed to match your floor. Follow the instructions on the kit for usage information.

The next thing you need to do when repairing hardwood floors is to use your flooring nails to secure the new plank to floor. You may also want to use your nail set to keep the nails hidden; it also won’t hurt to use wood filler to keep the screws out of sight. Now, the final step is to apply finish to the new plank, trying to match the tone of the other original planks as best as possible. It is often difficult to do this, so you may have to decide whether you should simply refinish the rest of the floor or have a plank or two of a slightly different shade.

During holidays, you feel so excited and enjoyable due to living in your home throughout the holidays and do lots of exciting things like, party with friends, call guests to stay with you for spending some of the holidays, playing with the children. Along with this, you look grumpier about any damage cause to your new and beautiful wood flooring because of increasing number in the activities and scampering of people here and there across the floor. It is understood that in the holiday season, many kinds of activities carry on in the home and cause profound damage to your beauty of wood flooring in which scratches, scuff marks are very much common to see. But you do not have to worry about this because there are many ways to solve those issues about the prevention and maintenance of real hardwood flooring from the nasty weather, multiples of guests, foliage decorations, etc. So by following these tips, you will never get frustrated to get in touch with your hardwood flooring contractor in order to repair your wood flooring. You will then only enjoy your shopping outside, hanging out with friends, money gifts and many other festivities.

Repair a buckling hardwood floor at the first signs to prevent further damage and help avoid a major repair later. If you can get to the floor from below, you may be able to fix it without removing boards, but in most cases, replacement of the damaged area is necessary.

Unfortunately some stores don’t have all the tools needed for a proper hardwood floor repair. A few exceptions or ones a novice can handle may include fixing squeaky floors with ring shank nails or using putty or colored stain pens to repair scratches. Another may be fixing glued floors that have lost their adhesive bond. The tool of choice here is a glue injection kit, but you will not find them at the big orange or blue stores.

The ideal attachment in certain wood flooring repair situations is a slot cutter used with a router. Finding one that matches the specifications or the depth of the groove in the existing floor is the hardest part. Some hardwood manufacturers offer one for such repairs while others don’t. Contacting dealers that handle the hardwood product is suggested.

The beauty of knowing good wood floor repair techniques is that a flooring squeak is easily repaired but there is no large screw head marring your finish. The remaining tiny hole is then filled with wood filler that matches your flooring and is barely noticeable! This system is definitely the answer to your squeaky hardwood floor dilemmas.

When there is wood floor water damage the action to be taken depends on its severity. If it’s something like a flood there is no small repair for the floor. It will have to be completely replaced. Excessive damage causes wood to warp and tile to become loose, making it impossible to repair.

Plank Flooring Now Readily available In numerous Types

Vinyl lumber planks usually come in 2 flavors : self-adhesive, peel and stick vinyl planks and the somewhat more difficult to put in ordinary variation that calls for adhesive for vinyl floor covering yet could last for longer. If the setup is done appropriately , both sorts of floor covering can last for many years but normally speaking glue-down versions are a lot more durable and less likely to become unglued with time . A lot of reviews on vinyl plank floor covering will recommend you stick to peel off and stick vinyl flooring if you are doing the setup alone, or have to get the job finished quickly , as the installment is generally much quicker and you will not have to wait for the glue to work out .

When you’re renovating the within of your house , there’s a great deal you need to think about . As an example , you’re going to have to choose which kind of look or style you desire . Do you want to keep the look you have? Will you go through some decoration magazines and discover a face-lift to give your residence an upgrade? Maybe you will certainly merely do some basic , aesthetic job . Eventually , it’s everything about your expectations . Past appearance and style , however , you’re visiting have to think about the various products you make use of and the temperature outside when you’re doing the work . Believe it or not , this is all visiting impact exactly how your residence looks and the convenience with which it is worked on . If you are remodeling your residence , after that you’re visiting be thinking about floorings . In this article , you will find out why you could intend to decide on slim slab flooring over bigger flooring .

You could discover vinyl plank flooring in a variety of finishes , from a waxed timber appearance with luster to hand-scrapped lumber coatings or drastically troubled ones that look antique. This makes vinyl plank flooring an actually good and extremely versatile choice for all your flooring needs . Vinyl is additionally pet friendly, so if you have dogs and are bothered with the damages they could possibly create to a real lumber floor or unsteady lumber laminate, vinyl flooring will certainly put your mind idle . If you desire your the home of look warm and welcoming however could not manage timber plank flooring or are stressed over the maintenance , vinyl flooring is just one of the most effective choices available .

When individuals select larger slab floor covering , it’s typically because it could give their house a more modern appearance . When you page with some of the high-end design journals , you’ll see a great deal of broad floor covering . For some homeowner , this is a great choice . One thing you should consider , nonetheless , is rate . Large floor covering is not economical . Actually , vast plank floor covering that is made from a good timber is most likely the most costly sort of floor you could purchase . It will also require a great deal of job , care , and treatment . For this reason , if you’re seeking a reasonable price and reduced maintenance floor, after that you should certainly take into consideration a narrower slab .

Vinyl slab floors is actually a much more current type of floors that provides most of the advantages of hardwood floor covering , nonetheless at considerably decreased costs . There’s also a few other critical advantages which vinyl plank flooring have over hardwood flooring making it a fashionable choice for any person that desires that traditional wooden ground appearance with no troubles and greater rates .

Another down side of bigger plank flooring is that it contorts a lot , especially in the chilly . In fact , if you put your vast flooring in during the middle of wintertime , chances are you will need to let it sit for a few days in the heated residence while it readjusts . Large plank floor covering warps, modifications shape and size . Narrow slab flooring does not deform .

Prior to you invest a bunch of money on lumber flooring , think about taking a look at some testimonials on vinyl slab floor covering initially . Vinyl slab flooring can look extremely similar to costly lumber floor covering , but it costs much less and is really simple to put in . You could find vinyl flooring that looks like lumber yet costs as low as 3 bucks each square foot, making house restoration projects easy and affordable .

A rustic wood floor will have more of the organic character such as knots, distinct shade variants , possible insect marks, area checking and differing grain patterns . Recovered or Antique floor covering normally originates from the old development forests from our very early American record . Today they could still be located in floorings in aged homes and historic frameworks in lots of parts of the nation . This timber screens character unparalleled by any synthetic methods . Wide Plank flooring can likewise come from freshly sawn old development lumber. Using larger widths and longer lengths will minimize the variety of end to finish seams in the floor which creates a historical genuine look .

.

Hardwood Floor Care & Maintenance

Shield the natural charm of your Hardwood flooring
Hardwood items, with their Durable finishes, offer remarkable wear; simple, no-wax care; plus superior resistance to staining from all common family products such as coffee, shoe polish, lipstick, acetone, mustard, and more. A couple of easy upkeep steps, however, will help protect your investment and keep your Hardwood flooring appearing like brand-new.

For cleaning, make sure you …
Utilize a damp fabric to blot spills and spots as quickly as they take place. For hard spots, such as oil, paint, markers, lipstick, ink, tar, or cigarette marks, use acetone/nail polish cleaner on a clean white fabric, then clean with a moist fabric. Always prevent permitting liquids to stand on your floor.
Sweep, dust, or vacuum the floor routinely with the difficult floor attachment (not the beater bar) to avoid accumulation of dirt or grit that can scratch or dull the floor finish.
Sometimes clean the floor with a wet mop or cloth.
Occasionally clean the floor with a premium Hard Surfaces Flooring Cleaner from a Quality manufacturer’s line of floor covering care items.
While cleaning is easy, there are a few things to avoid:.
Don’t utilize oil based, wax, polish, or strong ammoniated or abrasive cleaners.
Don’t utilize steel wool or scouring powder.
Don’t wash or wet-mop the floor with soap, water, oil-soap cleaning agent, or other liquid cleaning product. This can cause swelling, deforming, delamination, and joint-line separation, and nullify the guarantee.
Don’t utilize any kind of buffing machine.

Other regular care guidelines:

For areas such as candle wax or chewing gum, set the area with ice then delicately scrape with a plastic scrape, such as a credit card. Be careful not to scratch the flooring surface area. Wipe clean with a moist fabric.
For challenging discolorations, utilize your Hard Surfaces Flooring Cleaner.
Do not make use of any type of buffing equipment.
Use protective mats.
Pretty good quality entry and exit mats will help gather the dirt, sand, grit, and other compounds such as oil, asphalt, or driveway sealer that can otherwise be tracked onto your flooring. Do not utilize rubber- or foam-backed plastic mats as they may blemish the flooring. To prevent slippage, use an authorized vinyl rug underlayment.

Use floor protectors on furniture.
Use floor protectors and wide-load-bearing leg bases/rollers to minimize indentations and scratches from heavy items. As a rule, the heavier the things, the wider the floor protector ought to be.

Maintain relative humidity level.
Maintain a regular indoor relative humidity level in between 45 and 65 % throughout the year to decrease the natural expansion and contraction of wood.

Heating Season (Dry): A humidifier is recommended to prevent excess shrinking due to low humidity levels. Wood stove and power heat often produce extremely dry conditions.
Non Heating Season (Wet): An air conditioning unit, dehumidifier or occasionally turning on your heating system can maintain humidity during the summertime months. Avoid excessive exposure to water throughout durations of inclement weather condition.
Avoid sharp items.
While a quality Hardwood floor is among the most put on resistant floors on the marketplace, sharp or pointed things can harm it however.

Watch your feet.
Don’t walk on your flooring with stiletto-style heels, surged golf shoes, or cleats. They might trigger indentations in your flooring.

Watch your pet dog’s feet.
Keep your animal’s nails trimmed to keep them from scratching your flooring.

Rearrange your rugs and furniture.
Periodically reorganizing your location rugs and furnishings will permit the flooring to age equally. UV sunlight will soften the tone of different species of hardwood to differing degrees.

Protect the floor when moving.
Use a dolly when moving heavy furnishings or home appliances. However initially, put down a sheet of quarter-inch plywood or Masonite to protect the floor. Never try to slide or roll heavy things throughout the floor.

Perks Of Hardwood

Rich and inviting, hardwood makes an unique statement. Due to the fact that of an excellent array of natural variations– from boards with severe character, graining, and color variation to those that are equally colored and constant– shiny hardwood can develop a distinctively beautiful floor. Your sort of floor. Warm, stylish, and initial.

Stunning and lasting, hardwood floors make an elegant selection for almost any space in your house. When picking hardwood, the color, character, and construction kind are the crucial factors to think about.

Color: The color of hardwood floors ranges from quite light to extremely dark– and everything between. While, as a regulation, lighter floors work well in modern settings and darker floors are elegantly at house in more conventional rooms, selecting is basically an issue of choice.

Character: Naturally present in hardwood, grain variations help determine a wood’s “character.” Dramatic grain suggests a rustic sensation. Historically, moderate grain variations are connected with the traditional. And hardwood with hardly any graining has a sleek, modern look.

Construction: There are 2 fundamental choices– solid or crafted. Strong planks are produced from a single piece of wood and make a handsome floor that lasts for years. Engineered planks are made from a number of layers of wood (with a core of plywood or HDF) and are developed to hold up against higher levels of humidity. This implies they can go in some spaces strong floors cannot.

Keep in mind that there are numerous differences in finishes– gloss or radiance level, scraping degree and technique, wire-brushing, and so on. Ask our sales personnel to show you samples.

Some Wood Floor Facts

Hardwood flooring is among the few flooring choices that can add value to the home. The range of types, stain options, surface areas like smooth, hand junked and distressed make hardwood flooring a very appealing option.

Strong Hardwood

Solid hardwood floors are generally 3/4″ thick. They can be set up on and above grade. Board lengths are arbitrary. Board lengths can also differ by the grade of the hardwood. A “Tavern” or “Cabin” graded hardwood include much shorter board lengths. Cleaner woods or “Select” grade consist of longer board lengths. Solid hardwood can be acquired unfinished or prefinished. Prefinished wood will typically carry a longer finish guarantee. Most prefinished hardwood makers will apply 7– 10 layers of finish.

Engineered Hardwood

The surface layer is peeled of the log and glued to the addition cross-plied layers of wood. Engineered hardwood provides dimensional security because of the construction. Engineered floors can be installed above, on or below grade (basement level). Perfect for the Michigan environment!

Hardwood Styling Trends

You might be amazed by the number of styles, types, and finishes offered in today’s hardwood flooring. Simply ask us about these hot new styling trends:.

Exotic appearances that don’t come from the jungles. They’re American-made and eco-friendly. Some products even use a series of sophisticated procedures that infuse color throughout, so scratching and scraping are far less evident than in stained woods.
Premium strong planks made from 100 % recycled mill by-products.
A horizontal scraping strategy that develops a result like quarter-sawn wood, a late 19th-centure technique used in great floors.
High-gloss finishes that add sleek elegance perfect for contemporary design.
5″ widths incorporated with standard -large planks, for a posh designer appearance.
Flooring in opaque black and white, pre-owned separately or in combination– upscale and the height of fashion in clothes and the house.
Exceptionally stylish browner, grayer colors– tones that range from coffee browns to new, trendy charcoal.
Hand-brushed surface areas– subtle, soft, and touchable.
Flooring that has the appearance of reclaimed wood from bygone ages.

The richness of a natural hardwood floor is ageless. No various other flooring provides the heat, charm and value of wood. Today’s wood floors are available in more colors than before and with the appropriate care, they can last a lifetime. Wood flooring presents an unmistakable sophistication to any room and becomes increasingly more valuable as time passes. The benefits of wood flooring consist of:.

Includes value to your home.
Is clean and easy to maintain.
Helps to prevent dust allergies.
Is resilient.

Wood Flooring can be Budget-friendly.

Hardwood floors add significant value to your property, and with time, they maintain their value. When various other flooring choices begin to look tired and used, your hardwood floors will still look stunning. Years from now, if you begin to discover that the sheen starts to minimize a bit, bear in mind that unlike carpets and vinyl, hardwood floors can be refinished instead of replaced.

It’s been proven that including hardwood flooring to your home is a clever financial investment. In a nationwide survey of genuine estate agents, 90 percent said that homes with wood flooring sell faster and bring higher costs than residences without wood floors.

Easy Upkeep.

Hardwoods are easy to look after and today’s finishes are tough and can stand up to active households and work areas. Because of new technology in discolorations and finishes, care of today’s wood floors is simple and calls for extremely little maintenance.

Health benefits.

Many physicians suggest hardwood floors as an action towards a healthier house. The underlying issue is the quantity of dust, dirt and bacteria that carpetings keep. Hardwood floors trap far less pollen, mites and mold. They do not harbor animal dander and dust and they tidy up quicker and more effectively than carpeting. Sweeping and routine vacuuming your hardwood floors will help to get rid of these troubles, leaving your house less susceptible to allergy-causing representatives.
Wood floors are likewise ecologically friendly. Given that it is a natural resource, wood is renewable and recyclable.

Variety.

Wood floors have come a long method in the past few years. Today, there are more designs, colors and types of wood flooring available than before. No issue how discriminating your taste, you make sure to find a color and design to fit your design.

Discover a hardwood floor for each space in your house, consisting of those locations wood has actually never gone in the past, like the kitchen and energy room. Let stunning hardwood flooring assist your home mirror your personality.

A Scandinavian Heritage

Laminate flooring stands for the most significant flooring entry in the past 25 years.

The item we know today as laminate flooring was initially developed as an additional possible use of high-pressure melamine laminate.

This happened in Sweden in the early 80s. An item was produced with a base of several layers of paper, impregnated with special resins pressed together under high pressure into a highly wear resistant composite material. The decorative paper identified the design. The finished laminate was then glued onto a carrier and cut into sections with extremely specific measurements.

Ornamental laminate was an item that was commonly used on kitchen area countertops, tables or wall paneling, but undoubtedly not yet for floor covering. This clearly developed a chance, but a flooring application brought brand-new technical difficulties. The preliminary concern to be resolved was the wear aspect. It is apparent that floors are walked on and for that reason suffer a lot even more normal abuse than furnishings or counter tops. A laminate floor plainly needed to be more long lasting.

A reinforced laminate that was around 10 times more powerful than counter tops was created and the first flooring started to be offered. As research expanded, the relative strength of flooring laminate enhanced considerably to at least 20 times that of countertops.

Essential parallel developments also were happening throughout these very early days. Product packaging was one. Wood flooring at the time was normally offered in long strips of approximately 8 feet and installed just by a competent expert. Laminate flooring was different right from the beginning. It was packaged eight planks to a carton that was roughly half this length (about 4 feet). The easy-to-handle carton was fairly lightweight and can be carried by automobile or in an elevator with convenience. Its carton components amounted to around 20 square feet (two square meters).

Due to the fact that of these revolutionary factors and convenience of setup, a huge do-it yourself market was produced in Sweden that exists today. In reality, even more than 90 percent of laminate flooring in Sweden still is self-installed!

Reasons for Acceptance

The system of gluing, making use of a tongue and groove technique that, when done appropriately, develops a single unit that is impervious to normal home spills or tracked-in rain or snow. This single system broadens or contracts with modifications in humidity. (This movement, by the means, can not be seen).

The strength of the bond in producing the single device allows heavy items, such as fridges or bookcases to be placed directly on the flooring.

Offered the glue is applied correctly, there is no problem with gaping. This process of installation is called a drifting floor. The laminate floor can be laid or “drifted” over the existing floor without being glued to the surface area. This system likewise encapsulates the original floor. In many cases, (with the exception of fabric), the older floor is not eliminated. This saves time and installation expenses! Both the expert installer and the diy client rapidly welcomed the floating floor method due to the fact that of the simplicity of setup and removal as compared with a glue down (to the subfloor) floor.

A simple removal process replaces the laminate floor at which point it can be damaged without any risk to the atmosphere. Laminate floors included irrelevant quantities of weather conditions that affected indoor air quality, plus it could be installed in a very little amount of time.

The last ingredient for success (and an important one) is in the looks of the floor. In the start essentially all the floors replicated were wood types. Why? Merely since these patterns were wanted by the public. As laminate flooring expanded in appeal, various other looks were introduced, consisting of marble and stone. Among the interesting aspects of laminate flooring is that the designs are limited only by the creativity of the manufacturers.

This has actually resulted in an item that is now acknowledged by the design and decorating neighborhood for its capability to produce an environment of wonderful beauty in addition to longevity.

The European Spread of Laminate Flooring

3 important characteristicsРdurability, design and setup easeРnow ensured the appeal of laminate flooring in Europe. Following the early success in Scandinavia, various other northern European countries, primarily Germany and the Benelux countries began to market laminate flooring. Distribution then spread quickly throughout the rest of Europe and ongoings today. Standards in Europe are being created by the CEN (Comit̩ Europ̩en de Normalisation or The European Committee for Standardization) team and will have the force of law. NALFA keeps a relationship with this crucial committee as well as EPLF (European Producers of Laminate Flooring). The interchange of concepts and technical data is seen by NALFA as one of the most essential areas of contribution.

Into North America

Laminate flooring crossed the Atlantic to North America in the very early nineties and was brought quickly to the marketplace. The outcomes of this intro surpassed even Europe.

The North American customer discovered that s/he can have a product of charm with extraordinary wear and unrivaled stain resistance. American and Canadian kitchen areas quickly became the main space for laminate floors. The consumer discovered that practically nothing might stain this beautiful floor– nor would sun or ultraviolet source fade– and put on patterns were a thing of the past. And there were even more advantages.

The resistance to imprint from heavy items or shoes was far higher than popular existing wood or vinyl floors. The floor was extremely easy to cleanse– vacuuming or damp mopping was required. There was no demand for waxing or stripping of the old wax accumulation.

The merchant enjoyed unforeseen simplicity of equipping and servicing. Dye lots, found in ceramic or fabric, are non-existent in laminate flooring. This store benefit also assured the customer of precise match in tone and color, even if extra matching flooring was purchased and set up a year later on!

Besides importers, UNITED STATE and Canadian production operations started to produce the item. Laminate flooring was on its method to another success. North America took to this new classification of beautiful flooring with its amazing qualities in unparalleled numbers.

Today, laminate flooring ongoings its amazing development. Virtually every room of your house, consisting of washrooms is profiting from a laminate floor application. The industrial marketplace is now discovering the aspects of laminate flooring for its demanding circumstances.

The classic timeless beauty and warmth of natural solid cherry flooring is hard to beat. It can be used as the perfect foundation for any interior decorating look. In fact, cherry, maple, red oak, birch, bamboo, Brazilian cherry and Mohawk hardwood flooring is all the rage in Tampa, FL and households that have them proudly show them off to the envy of many. Surprisingly, the much coveted solid hardwood flooring choices have prices that are very affordable today. This is also why hardwood floor sales, installation and repair continue to soar in Tampa, FL. This covers packages that include refinishing services for hardwood flooring, as well.

Choosing solid hardwood flooring is an environmentally friendly decision because wood is a natural resource that is renewable and also recyclable. Using solid hardwood flooring also contributes to having a healthy home according to various health associations because wood does not harbour allergens. Dust on wood is very easy to clean off.

Previously installed and finished solid hardwood flooring could also be refinished with the more modern methods. Old solid hardwood flooring with old fashioned finishes could be dulled by wear and tear and improper maintenance. The beauty of such solid hardwood flooring could easily be restored and even enhanced, though, with modern refinishing. The refinished solid hardwood flooring is even easier to maintain than before.

Only professionals in the solid hardwood flooring industry can provide the proper modern finish of excellent quality. They have the correct techniques and use the right equipment such as power sanders in preparing the unfinished hardwood flooring for the new stain, or to remove the previous finish from old solid hardwood flooring before applying new stain.

Hardwood floors refinishing services are needed because when people install hardwood floors this involves still unfinished hardwood flooring. Stains and finishes complete the look of the solid hardwood flooring and protect them. With the modern finishes available, solid hardwood flooring becomes easy to maintain and practical for the home owner. Cleaning hardwood floors then requires only sweeping or vacuuming along with occasional application of the appropriate professional wood flooring cleaning product.

Investing in solid hardwood flooring is a wise decision because not only will the home look its best but will also increase in value. This fact is supported by the findings of a national survey conducted among real estate agents. Not only a majority but as much as 90 percent of them declared than houses featuring solid hardwood flooring are quicker to sell and get higher prices than other houses. Solid hardwood flooring also increases in both beauty and value through time.

Among the various wood species, solid oak hardwood flooring is most popular in North America. It comes in white or red, with the white variety ranging from cream to medium brown and the red variety with a wide range of reddish brown hues. White solid oak hardwood flooring is harder than red solid oak hardwood flooring which has an open grain that is more porous. White solid oak hardwood flooring has low stiffness while red White solid oak hardwood flooring has medium stiffness. Both are considered as heavy hard wood with medium bending strength.

Floor cleaning machines for commercial applications must have ruggedness and versatility to handle cleaning operations for longer durations. The large number of choices available makes the task of choosing the right machine extremely challenging. It is important to understand that not all machines are ideal for all surfaces and in all environments.

Pressure Washers Hard surface cleaners must have high output power that stems from high pressure and temperature. Modern floor cleaning machines include pressure washers that combine the cleaning power of high pressure and steam temperature to get rid of the most stubborn stains, grease, oil stains, grime, and dirt that accumulate pretty rapidly in a commercial setup. In fact, top machines offer temperatures up to 330°F for maximum cleaning power.

The debate here is whether a pressure washer can be used. Water flow rates of the most powerful steam pressure cleaners can reach up to 5 GPM or gallons per minute. This can lead to flooding concerns in indoor areas where drainage facilities are not sufficient. However, if drainage facilities are no concern, pressure washers can quickly melt and blast away the toughest debris.

Rotary Floor Cleaning Machines When tackling large expanses of commercial flooring, some of the most popular floor cleaning machines are rotary hard surface cleaners. These machines can offer more than twice the cleaning power of pressure washers by targeting the high pressured spray directly onto the floor and containing the spray beneath the spinner head. Top models of these systems offer a motorized spinner system that targets the full pressure onto the floor, rather than using water pressure to rotate the spinner system.

Paired with extraction systems, the system simultaneously extracts the dirt and residues lifted by the high-powered, concentrated spray. Little moisture is left behind, greatly enhancing the productivity of each cleaning job.

Steam Cleaners A good steam cleaner can make the cleaning operation more complete. Modern machines, with advanced antibacterial technologies, can eliminate germs and bacteria and can completely eliminate gum stains. They are ideal tile floor cleaners too. The steam temperature from these machines can reach up to 386°F with pressure levels of up to 150 psi. The combination of high temperature and pressure of tile steam cleaners is guaranteed to leave tile and floorings sparkling clean. Most machines come with optional attachments that can be used to dislodge dirt from corners and crevices effortlessly and quickly. Such attachments include detail brushes, grout lances, and more.

Tile steam cleaners are in demand because their advanced technology ensures enhanced cleaning results. The best floor steamers incorporate state-of-the-art technology to improve the commercial floor cleaning experience. A top-quality steam cleaner can speed up the cleaning process by cleaning and simultaneously extracting residual dirt left behind by high-temperature steam cleaning. Advanced tile floor cleaners have attached vacuums and filters to make sure that dirt, dust, and other harmful particles are do not reenter the air.

Steam cleaners, or floor steamers, are the ideal floor cleaning machines for tile, with their advanced extraction and added attachments. These machines can also tackle the cleaning of a variety of hard surfaces. Rotary hard surface cleaners are ideal for cleaning a wide variety of flooring materials, from concrete and linoleum to VCT and vinyl. Their efficient use of a motorized rotary system and extractor offers tremendous results. Pressure washers, on the other hand, or often called upon in auto detailing and a wide variety of commercial and industrial floor cleaning applications that take place outdoors or in areas with sufficient drainage.

Floor cleaning machines that use the highest-quality components in their construction can be trusted to deliver optimum performance and durability. It is advisable to use commercial cleaning machines from suppliers with impressive track records. They must also be chosen keeping in mind your specific cleaning requirements.

Fortunately, reputable suppliers of advanced tile floor cleaners have understood the demands of the market and devised modern cleaning machines that make commercial floor cleaning an easy task. Such suppliers offer product consultants that can help you select the best equipment for your needs.

Getting a new hardwood floor can be exciting. It can likewise be extremely disruptive to your house environment. In order to minimize the quantity of turmoil that your new floor set up causes to your house life it is recommended that you take some basic precautions to properly prepare for setup day.

By doing this, you can assist to ensure your hardwood flooring installation expert can be in and out with as little unforeseen complications as possible. This will certainly make the experience far more delightful for you and your household.

Before Installment

You want a problem-free setup and, to assist guarantee it, right here’s a list of things to do before the installer shows up.

See to it you understand who’s eliminating your existing flooring. If you want, the installer will do it. If not, you ought to make plans to have it gotten rid of.

Who’s moving the furnishings? Decide ahead of time if you want to handle the duty or if you want the installer to handle it. In any case, be sure to get rid of all vulnerable items from the space.

In general, your hardwood should run parallel to windows or, in narrow spaces, to the lengthiest wall. Included stability is accomplished by setting up hardwood perpendicular to floor joists.

Measure door clearances before you have your hardwood installed. If the new floor is thicker than your existing floor, door bottoms might massage. Plan in advance to have someone shave or saw the right amount off the bottom of each door so it does not drag.

Paint first. If you’re planning to paint, wallpaper, or do any various other remodeling in the space, it’s best to do it prior to your hardwood is installed. Keep additional paint to touch up any post-installation nicks.

This list of easy things you can be alert to prior to the day you have your new wood floors set up will help significantly in a smooth job. For additional preparation that might be specific to your job site conditions consult with your Wood Flooring Pros Professional Consultant.

Sliding Heavy Furniture: Avoid the movement of heavy furniture, couches, almirah over the surface of the Hardwood Flooring. If this is repeated often, then scratches and the abrasion can steal the texture and the shine of the flooring. Therefore, extra care needs to be taken in this regard.

Exposure To Sunlight: Normally, flooring is done inside the buildings but due to big and open windows and doors, Hardwood Flooring can get continuous exposure of the ultraviolet radiations coming from the sun. This can stain the flooring and make it look dull and greasy. Therefore, either put curtains or close the windows for sometime during the day.

Wash: Hardwood Floors, whether Laminated, Hand Scratched or Solid Wood Flooring, should not be washed on a regular basis with water, soaps and strong detergents. All these substances can severely damage and tarnish the appearance as well as the material itself from inside. Hence, to clean the Hardwood Floors, much of the effort is not required. One can wash them once a week with the vacuum cleaners or the dry mop. Do not ever use the wet mop over Laminated or Engineered Wooden Flooring. Not only this, Suppliers and Distributors of Solid Wooden Flooring also provide proper guidelines to the customers after fixing the wooden flooring over the floors.

Dust Particles: The biggest enemies of the Hardwood Flooring are basically dust and grit, which once accumulated make it difficult to clean. Therefore, weekly cleaning of the floors is important.

The industry is occupied with many Suppliers and Distributors of the Hardwood Flooring but there are only few who are reliable and meet the standard requirement of the customers. Therefore, it is another precautionary measure for the buyers to acknowledge the genuine Solid Wooden Flooring Supplier and verify their product before purchase.

Although Hardwood Flooring is very durable and strong, their handling technique is lot different from normal cemented or marble and granite floors. Unlike marble or granite floors, it cannot be treated carelessly.

London Flooring Supplies Ltd.- One of the leading company20providing high quality of Wood Flooring for commercial and domestic use. You can buy wooden flooring from our online website :www.londonflooring.uk.com.

Hardwood Floor is best suited for homes and offices. It is something that brings elegance to your home and gives exquisite look to the offices. It has its own separate identity and is easily noticeable. There are various types of Hardwood Floors such as Oak Flooring, Pine Flooring, Maple Flooring, etc.

Installing Sheet Vinyl Over Existing Sheet Vinyl

Many people believe it is not possible to install sheet vinyl over an existing sheet vinyl floor. The truth is, under certain circumstances it is a very stable installation. In this article I hope to remove any doubt you may have about when it is appropriate as well as how it can be done.

Vinyl floors in sheet form can be installed on many substrates. one with many shades of gray is existing vinyl flooring. the type of existing floor needs to be considered as well as how well it is bonded, its current condition and the level of embossing or texture there is to the current floor.

If the current flooring is not well adhered to the existing substrate it usually is best to remove it first. If it is well secured you can look at the next thing to consider. It should also be noted that one should be aware of the approximate age the existing floor was installed. If it was prior to 1980 I would suggest you have it first tested for asbestos before removing it. A trained flooring professional will also be able to help you identify through some non technical methods if the floor may contain asbestos. If you find it does, professional abatement should be contracted.

So if the floor seems to be down well you can now look at the current condition of the existing sheet vinyl flooring. If it is in minor disrepair, simply asses if the areas can be patched first to make the floor smooth & level. If this appears possible you should be ok to now look at the texture/embossing. If the floor is heavily embossed it is usually advised to “skimcoat” the whole floor first to remove any texture and ensure a completely flat and smooth finish to which you can apply your new floor.

It should also be noted there are special products designed for embossing leveling tasks and the method used will vary based on the existing product. I would again encourage you to work closely with your local independent flooring professional to help you determine the best course of action. The trained eye of a true flooring pro will make the entire process seem quite simple.

Take a look at a little demo video I found on installing sheet vinyl over an existing sheet vinyl that is on concrete.

The Evolution of Click Vinyl Plank Floors

As I sat here thinking on this topic I was reminded of one of my long list of songs I have always loved. “If I could turn back time” makes a statement into wanting to either change the past or to revisit it in your mind. In this case for me it is the latter. I went back to a time when there was no such thing as a click vinyl plank flooring product. But we first saw a click together product called laminate flooring which it now mimics.

Back then it was a completely new concept that took the market (in the U.S.) by storm. the new buzz word in floor coverings was “pergo” flooring. Pergo was actually a brand not a type of floor, but the market adapted it as the new product category until the industry finally educated the consumer on this new product category called laminate.

One of the biggest issues that came to light with these floors was their inability to handle normal levels of moisture that came along with typical household use. The industry tried several different solutions to this but for years never quite got it right. The floating installation of these floors was a popular selling point that eventually evolved into a “click” together system which addressed a big issue with the moisture from the joint glue causing joints to “swell”.

In typical fashion, the american consumer demanded a better & better performance by these products at lower prices. The manufacturers answered with constantly improving this hot product line.

Recently, when laminate manufacturing capacity hit humongous proportions followed by a worldwide economic downturn we found these manufacturers scrambling to keep their machinery running. They managed to find a way to use their laminate production equipment to put the same “click together” locking system on luxury vinyl tile with a few simple adaptations. Take a look at this video of some click LVT options from IVC.

Like any other product (especially a newer product category) their have been some growing pains and this category continues to evolve through 2013. I as always recommend you be sure to deal directly with an independent well trained sales professional and dealer that can help you sort through your options with the most complete and up to date information.

Armstrong’s American Scrape Collection

I have taken a liking to many of the newer scraped finish wood floors. Some people like to refer to them as distressed hardwood flooring, but actually they are two different things. To show you a good example of an actual hand scraped wood floor…

In this video above, Armstrong Product manager, Chuck, shows off the richly textured floors in their new American Scrape hardwood floor collection. These floors are now available in hickory (domestic) and oak, and they’re made in the good ole USA.

The richness & beauty of hand scraped wood floors

The richness & beauty of hand scraped wood floors has become very popular in today’s homes. Armstrong seems to always stay on the cutting edge of design trends. As more people have wood floors installed in their homes, textured finishes such as this collection are becoming quite popular. They help to hide wear and tear on the wood flooring and keep it looking less worn than otherwise flat and smooth finish wood flooring. The rough texture of the machine scraped (synthetic hand scraping) on many textured hardwood floors today are a good choice for many active homes.

Most flooring companies will carry a variety of different scraped type finishes in their selection array. However, one thing you should always be aware of is that many hand-scraped wood floors may have a very thin wear layer, especially if they are an engineered wood floor. This type of floor can often wear our sooner than you may like. Be sure to talk to an experienced and reputable independent flooring dealer that carries a variety of brands to get the whole picture.

An experienced flooring professional will be able to guide you through the process and help you make the best choice of handscraped wood flooring for your home. There are many very high quality textured or scraped finish wooden floors available on the market today that will last you every bit as long as the old traditional solid wood floors did for your grandparents!

 

The Torch Brothers share how to seam carpet

 

Attempting to install your own carpeting can be a daunting task. Many people try it only to abandon the idea mid stream and call a professional.

Just in case you have the inclination the video here above shows some great tips on how to seam carpet should you feel daring enough to attempt this flooring installation.

For another perspective  that may be useful to you  some bullet points can be found also below. According to the folks at This old House, the steps below should be followed should you wish to seam your own carpet…

Steps:

1 Remove old carpet and padding from room; vacuum the subfloor clean.
2 Nail down an extra tack strip alongside the original tack strips.
3 Spread padding adhesive onto floor along the walls and at all seams.
4 Set padding down on subfloor and secure seams with duct tape.
5 Roll carpeting across the room.
6 Cut carpeting to fit around wall corners.
7 When seaming two pieces of carpeting, use a cushion-back cutter to trim the carpeting edges.
8 Apply latex seam sealer to carpet edges, let dry.
9 Align the seams between carpeting pieces, then slip piece of seam tape underneath.
10 Activate the adhesive tape with a seaming iron.
11 Use knee kicker to hook edge of carpeting onto the tack strips.
12 Force carpeting down onto tack strip with stair chisel.
13 Trim excess carpeting along wall with double-blade wall trimmer.
14 Use knee kicker and stair chisel to force rough-cut carpet edge into space between tack strip and base board.
15 Employ a power stretcher to pull carpet tight across floor; stretch carpeting toward each wall.
16 Secure the carpeting at doorways with transition molding.

 

Mohawk has been producing carpet for about as long as any manufacturer in existence. They offer an experienced perspective on how to seam carpeting. For additional Info on how you might try to install your own carpeting, you can see what Mohawk has to say on the subject.

New Trends In Floor covering show Hardwood floors as a popular choice

Flooring trends seem to be constantly changing. Each year there are new styles, colors, and a variety of new textures that seem to be available. I do not know how anyone is suppose to keep up! Consumers seem to be replacing their floors more often than in past generations. much of this is due to the fact that design trends move much quicker than they perhaps did in the past.

What are the hot trends today in floors

In 2013 the trends are seeming to be moving quickly toward the hot new vinyl floating plank category. Many flooring dealers we have spoken to are claiming a surge in people wanting the convenience of a laminate floor coupled with the ease of cleaning of the vinyl plank that this product offers. We recently spoke with Scott McClellan the General manager at Nufloor – Floors To Go of Traverse City, Michigan who cautioned us to not discount the still solid popularity of hardwood flooring.

He also states that wood flooring has grown in popularity as more and more people realize the long term value it offers that other floor finishes do not. Though laminate floors are still quite popular, the introduction of the click together vinyl plank products has hurt sales of laminates. In addition, the consumers becoming far more educated on the different engineered hardwood flooring options has allowed dealers to sell more wood floors in the current market.

The downside to this trend may be that many consumers do not properly research the different quality variables in an engineered wood floor. By failing to do so they are exposed to spending the money for a hardwood installation today that may only actually last a few years before it needs to be replaced.

The takeaway of this wood floor trend

Consumers should be cautious about selecting a wood floor. Engineered of high quality is most likely the most stable choice for most installations. It should be said though, that one should be very thorough to understand the different qualities that are available. there are differences in thickness of the top layer, quality of milling, quality of raw materials, quality of bonding agents, make up of lower layers and much more. Due to this I would highly recommend you buy  your hardwood flooring from only the most knowledgeable independent and well trained dealers and sales staff.